Icecrypt S6600HD PVR - Maintaining the Digital TV Receiver; Sharing Channel Data

Open the apps screen, select Settings > Parental Control, and then enter the
passcode.
• Censorship: Specify a programme rating.
• Change PIN code: Change the passcode. The default is “0000”.
• System: With this set to Lock, the passcode is required when turning on the
receiver.
• Settings: With this set to Lock, the passcode is required when accessing the
Settings app.
• PlugIn: With this set to Lock, the passcode is required when accessing the
PlugIn app.
• Play List: With this set to Lock, the passcode is required when pressing the
playlist button to access a removable storage device.
8.7 Maintaining the Digital TV Receiver
The internal flash memory is used for maintaining the preference settings and
channel data.
Open the apps screen and select Settings > System Recovery. Use these to reset
or back up and restore the digital TV receiver.
• System restore to factory default: Reset all settings to factory defaults and
clear all channels.
• System restore to stored position: Restore the receiver using the stored set-
tings and channels.
• Store system data: Back up all settings and channels.
• Delete stored position: Clear all stored settings and channels.
Sharing Channel Data
It is possible to share the receiver’s settings and channel data with other receivers
of the same kind, using a flash drive. Connect a flash drive to one of the receiver’s
USB ports.
P S 61