8.4 Audio and Video Settings
Open the apps screen and select Settings > A/V Output Setting.
• TV Type: Determine which TV standard to use.
• TV Aspect Ratio: Determine which aspect ratio to use by default.
• Display Resolution: Determine which resolution to use by default. Tech-
nically, 1080p is better than 1080i, but the difference is only slight to most
people.
• Display Format: Determine how to display 4:3 pictures on the 16:9 screen, or
vice versa.
•
Pillar Box
: 4:3 pictures fit the height of the 16:9 screen with black bars on
the sides.
• Full: 4:3 pictures blow up to fit the width of the 16:9 screen with the top
and bottom edges cut off.
• Letter Box: 16:9 pictures fit the width of the 4:3 screen with black bars on
the top and bottom.
• Pan Scan: 16:9 pictures blow up to fit the height of the 4:3 screen with
the sides cut off.
• Video Output Mode: Determine which colour space to use for the SCART
output. RGB is much higher quality than CVBS.
• HDMI Dolby Digital: Determine whether or not to pass through Dolby audio
via HDMI when available.
• Dolby Digital Default: Determine whether or not to use Dolby audio when
available.
• Sound Mode: Generally, an audio track has two sound channels. Determine
which sound channel to use by default.
• Audio Sync Delay: If the sound and picture don’t match up, adjust this until
they match.
P S 59
To Next Page
Loading...
