2.3 Satellite Dish Connection
Connect the cable form the satellite dish to LNB IN 1. In most situations, con-
nect LNB OUT 1 to LNB IN 2 using the loop-through cable. Only when two satel-
lite dishes are available without any multi-dish switch, users should connect the
cable from the other dish to LNB IN 2
2.4 TV Connections
This digital TV receiver has a wide range of connectors available for use by a TV.
The list below shows video connectors in the order of picture quality.
• HDMI
• Component video
• SCART
• Composite video
Use the HDMI connector to connect the receiver to a TV for the best available
picture quality. If the TV has no available HDMI connector, try the next best con-
nection type.
18 I
To Next Page
Loading...
