PREFACE
• This manual is an integral part of the pro-
duct, providing all the information required
to ensure correct installation, operation and
maintenance of the machine.
• Read the manual carefully, making refe-
rence to it for machine operation. Keep the
manual in a safe place where it can be ac-
cessed by all authorised operators (instal-
lers, operators and service personnel).
• The machine has been constructed in com-
pliance with the directives 2006/95/CEE
(low-voltage), 2004/108/CEE (electroma-
gnetic compatibility) and 2006/42/CEE
(machines; for certain models only).
• Installation must be performed in com-
pliance with National and Local Standards,
by professionally qualified staff and accor-
ding to the manufacturer's instructions.
• Any contractual and extra-contractual lia-
bility of the manufacturer is excluded due
to damage caused by errors during instal-
lation and use and, however, failure to com-
ply with the National and Local Standards
in force and the instructions supplied by
the manufacturer.
• Make sure that the supplied or specified
components are used.
• Before performing any cleaning or mainte-
nance operation, disconnect the appliance
from the electric power supply mains by
operating on the system switch and/or the
product switch.
• In the event of faults and/or bad functio-
ning, deactivate the appliance and do not
attempt any repairs or direct intervention.
CAUTION
THE FOLLOWING OPERATIONS
AND THOSE HIGHLIGHTED
BY THIS SYMBOL MUST NOT BE
P
ERFORMED BY THE APPLIANCE USER
In particular:
•
Electrical connections
• Water connections
• Installation
• Testing
• Repairing machine components
• Disassembly of the appliance
and/or its components
• Adjustments and calibration
• Cleaning the appliance and maintenance of:
- Electrical parts,
- Electronic parts,
- Mechanical parts,
- Refrigeration system parts
THE TEXT WITH THIS SYMBOL
IS OF PARTICULAR IMPORTANCE
OR POTENTIAL DANGER SIGNALS
NOTA claries the current operations
To Next Page
Loading...
