EasyManuals Logo
Home>IceTech>Shot Blasting Machines>IceBlast KG20

IceTech IceBlast KG20 User Manual

IceTech IceBlast KG20
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
MANUAL FOR KG20 KG6 KG6 BASIC
DRY ICE BLASTING EQUIPMENT FROM ICETECH | PAGE 9
The combination of extremely high
cleaning speeds and a wide range of nozzles
means that even normally inaccessible parts
can be rapidly cleaned.
On/Off
The emergency switch connects or disconnects the
voltage to the control circuit of the machine.
The machine is only voltage free when the
battery plug on the battery is removed.
On: The machine can be operated from the
trigger switch on the blasting gun.
Off: The trigger switch on the blasting gun
remains inoperative, and the battery indicator
is switched off.
KG6 Basic:
No adjustment of the dry ice consumption
Fixed predened consumption rate.
KG6: Dry Ice Dispensing
The knob is graduated from 0 to 10 and allows the
adjustment of dry ice consumption. The scaling
of the knob indicates only how much the knob is
turned in relation to the initial starting position.
kg: 15 to 40 | lbs: 33 to 88
KG20: Dry Ice Dispensing
Dry ice quantity per hour.
Can be adjusted by pressing
or .
kg: 16 to 55 | lbs: 36 to 122
Filling up with Dry Ice
The dry ice tank in the machine must be lled as
necessary with dry ice from an insulated container
delivered by the dry ice supplier.
The machine works with the dry ice tank cover
open, or closed. Filling can thus be carried out while
the machine is in operation.
The safety regulations supplied by the dry ice
supplier must be followed when handling the dry ice.
Adjustment of Air Pressure
(working pressure)
The knob for adjusting the air pressure must be
pulled out and turned to the intended pressure
(as shown on the pressure gauge beside the knob).
After adjustment, press the knob in again to lock it
against unintentional turning.
The adjusted air pressure shown on the gauge is an
indication of the velocity at which dry ice (dry ice
pellets) strikes the object being cleaned. The read-
ing can then be compared with the results achieved
(the effectiveness of the blasting jet) to decide
whether further adjustment is necessary.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IceTech IceBlast KG20 and is the answer not in the manual?

IceTech IceBlast KG20 Specifications

General IconGeneral
BrandIceTech
ModelIceBlast KG20
CategoryShot Blasting Machines
LanguageEnglish

Related product manuals