IceTech IceBlast KG20

MANUAL FOR KG20 KG6 KG6 BASIC
DRY ICE BLASTING EQUIPMENT FROM ICETECH | PAGE 25
Technical Data
IceBlast KG20S V1 Complete
Dim. mm/inch
Length: 480 / 18.8
Width: 520 / 20.4
Height: 1030 / 40.5
incl handle
Height: 850 / 33.4
w/ handle folded down
Weight
kg: 58
lbs: 127.8
Dry Ice Capacity
kg: 20
lbs: 44
Dry Ice Consumption
kg/h: 16 - 55
lbs/h: 36 - 122
innitely adjustable
Supply Pressure
bar: min. 5 - max. 10
psi: min. 72 - max. 145
Blasting Pressure
bar: min. 2 - max. 10
psi: min. 29 - max. 145
Prepared for Light Gun
Air Consumption
m
3
: 1 - 5
cfm: 35 - 175
depending on nozzle combination
Compressed Air Connection
3/4” claw coupling
The compressed air must be kept clean and
free of oil, foreign bodies and water
Power Consumption
110/230 V
AC 50-60 Hz
24 V handy rechargeable, interchangeable battery,
and battery charger
Single Hose System
Noise
Noise level 60-120 dB(A) depending on blasting
pressure, nozzle combination and material surface
User-Friendly Control Display
w/ Error-Log Indication
Including
• Standard Ice Gun,
with nozzle and nozzle holder
• Blasting hose KG20, complete, 5 m /16 ft
• Air supply hose, 3/4”, 10 m / 32 ft
IceBlast KG20S V1 Complete w / Light Gun
Including
• Light Gun,
with nozzle and nozzle holder
• Blasting hose KG20, complete, 5 m /16 ft
• Air supply hose, 3/4”, 10 m / 32 ft
“ The system produces no waste
products. Only the coating that has been
removed remains to be disposed of, and
this can usually be swept or vacuumed
from the oor. ”
MANUAL FOR KG20 KG6 KG6 BASIC
DRY ICE BLASTING EQUIPMENT FROM ICETECH | PAGE 26
Technical Data
IceBlast KG6S V2 Complete
Dim. mm/inch
Length: 480 / 18.8
Width: 520 / 20.4
Height: 930 / 36.6
incl handle
Height: 650 / 25.6
w/ handle folded down
Weight
kg: 50
lbs: 110
Dry Ice Capacity
kg: 6
lbs: 13
Dry Ice Consumption
kg/h: 15 - 40
lbs/h: 33 - 88
innitely adjustable
Supply Pressure
bar: min. 5 - max. 10
psi: min. 72 - max. 145
Blasting Pressure
bar: min. 2 - max. 10
psi: min. 29 - max. 145
Not Prepared for Light Gun
Air Consumption
m
3
: 1 - 5
cfm: 35 - 175
depending on nozzle combination
Compressed Air Connection
3/4” claw coupling
The compressed air must be kept clean and
free of oil, foreign bodies and water
Power Consumption
110/230 V
AC 50-60 Hz
24 V handy rechargeable, interchangeable battery,
and battery charger
Single Hose System
Noise
Noise level 60-120 dB(A) depending on blasting
pressure, nozzle combination and material surface
User-Friendly Control Display
Including
• Standard Ice Gun,
with nozzle and nozzle holder
• Blasting hose KG6, complete, 5 m / 16 ft
• Air supply hose, 3/4”, 10 m / 32 ft
“ Dry ice blasting is non-abrasive and
therefore surfaces are treated very gently.
Wear and tear resulting from the use of
steel brushes, scrapers and other blasting
materials is avoided. ”