MANUAL FOR KG20 KG6 KG6 BASIC
DRY ICE BLASTING EQUIPMENT FROM ICETECH | PAGE 13
“ The battery indicator displays the
battery level currently,
ensuring easy check-up of battery
status during operation. ”
2
1
3 Battery Recharging
Connect the charger to the plug on the back of the
machine and to 100V/220V. Recharging starts auto-
matically and the indicator turns yellow. The indica-
tor turns green when the battery is fully recharged.
The red diode on the battery charger indicates that
the charger is on.
Unplug the charger from the machine and the
100V/220 supply when the battery is fully charged.
The machine is ready for use.
If the effective operating time is considerably re-
duced, even after normal recharge, the battery may
be worn out. Replace it by a new battery.
IMPORTANT!!!
Before putting the machine into operation, the
battery must be charged for 6 hours. After that,
recharging will normally last approx. 5 hours.
The battery indicator on the machine displays the
status of the battery.
3
BATTERY CHARGING
The battery indicator is composed of 5 diodes:
<25% red
25% yellow (recharge battery)
50% green
75% green
100% green (fully charged)
KG20 + KG6:
The machine stops automatically if the battery
capacity is below 18%. Recharge the battery
before use.
KG6 Basic:
The battery must be recharged immediately if
the red diode of the battery indicator is on.
The battery should be recharged every 7
th
day in
order to maintain optimum battery efciency.
1 Battery
24 V handy interchangeable battery.
2 Battery plug
On change of battery: Unplug the battery plug
and remove the battery to be recharged.
Insert the new fully charged battery.
Always check to ensure that the battery plug is
xed correctly.
To Next Page
Loading...
Need help?
General
