IceTech PR350H - Page 107

Troubleshooting errors on Pelletizer PR750H and PR350H.
TAG NAME ID : 36+37
Error extruder plate 1 not selected Error extruder plate 2 not selected
www.icetechworld.com | IceTech Dry Ice Technology | Rev 2
Tag name ID 36+37
Error extruder plate 1 not
selected.
Error extruder plate 2 not
selected
1. The extruderplate 1 or 2 has not been
selected.
Yes, one of the extruderplates is not
selected.
Make the selection of the
extruderplates.
Reset and restart
the Pelletizer.
No, both plates has been selected.
? Contact IceTech
technical support.