Procedures for maintenance and repair
www.icetechworld.com | IceTech Dry Ice Technology | Rev 1
Page 41
Procedure no. 9 Calibration of Ø160/Ø50 hydraulic cylinders.
Calibrations of Balluff transducer BTL7-E100-Mxxx-B-S32 using teach in mode.
Description of calibration step
by step
LED indicators
Picture of step
7. Reset
Immediately after press both
buttons in, hold for at least 6
seconds
The left and right LED flashes
green and red simultaneously.
To Next Page
Loading...