IceTech PR350H - Page 90

Industrivej 62
DK-6740 Bramming
Denmark
Original
Version:
1.0
IceTech PR350H
Alarm List
Page:
1 of 3
Date:
01.02.16
Init:
JM
Industrivej 62 ● DK 6740 Bramming ● Denmark ● www.icetechworld.com
ALARM LIST
Using the alarm list and diagrams in the appendix for solving problems with the Pelletizer PR750H. When errors appear
comparing and indentify it in the table below. Then go to the appendix at the page which is listed in the table. Here there
will be a flow diagram which will guide through a troubleshooting sequence.
ALARM LIST - Trouble shooting.
Alarm no.
Alarm text
1
Max. purge time exceeded. Purge limit 1 not reached. (400)
2
Extruder 1 max. Time forward exceeded. (A120)
3
Extruder 1 max. Time forward exceeded. (A130)
4
Extruder 1 max. Time forward exceeded. (A1600)
5
Extruder 1 max. Time forward exceeded. (A1700)
6
Extruder 2 max. Time forward exceeded. (A120)
7
Extruder 2 max. Time forward exceeded. (A130)
8
Extruder 2 max. Time forward exceeded. (A1600)
9
Extruder 2 max. Time forward exceeded. (A1700)
10
Extruder 1 max. hydraulic pressure return exceeded.
11
Extruder 2 max. hydraulic pressure return exceeded. (B160)
12
Extruder 1 max. hydraulic pressure return exceeded. (A1300)
13
Extruder 2 max. hydraulic pressure return exceeded. (B1300)
14
Extruder 1 max. hydraulic pressure return exceeded. (A2000)
15
Extruder 2 max. hydraulic pressure return exceeded. (B2000)
16
Extruder 1 max. hydraulic pressure return exceeded. (A2500)
17
Extruder 2 max. hydraulic pressure return exceeded. (B2500)