IceTech PR350H - Page 91

Industrivej 62
DK-6740 Bramming
Denmark
Original
Version:
1.0
IceTech PR350H
Alarm List
Page:
2 of 3
Date:
01.02.16
Init:
JM
Industrivej 62 ● DK 6740 Bramming ● Denmark ● www.icetechworld.com
18
Max. oil temperature exceeded.
19
Oil level too low / level sensor activated.
20
Extruder 1 min. temperature for degassing exceeded. (A500)
21
Extruder 2 min. temperature for degassing exceeded. (B500)
22
Extruder 1 min. temperature for degassing exceeded. (A1400)
23
Extruder 2 min. temperature for degassing exceeded. (B1400)
24
Extruder 1 max. pressure for degassing exceeded. (A500)
25
Extruder 2 max. pressure for degassing exceeded. (B500)
26
Extruder 1 max. pressure for degassing exceeded. (A1400)
27
Extruder 2 max. pressure for degassing exceeded. (B1400)
28
Min. Pressure for liquid CO2 exceeded.
29
Error, motor relay.
30
Internal error.
31
Min. temperature before exchanger exceeded.
32
Max. inlet pressure exceeded.
33
Emergency stop activated.
34
Error extruder plate changer 1
35
Error extruder plate changer 2
36
Error extruder plate 1 not selected
37
Error extruder plate 2 not selected
38
Error build pillow Cylinder 1 (A620)
39
Error build pillow Cylinder 2 (A620)