IceTech PR350H - Page 92

Industrivej 62
DK-6740 Bramming
Denmark
Original
Version:
1.0
IceTech PR350H
Alarm List
Page:
3 of 3
Date:
01.02.16
Init:
JM
Industrivej 62 ● DK 6740 Bramming ● Denmark ● www.icetechworld.com
40
Error Weight
41
Error No container on the Weight
42
Error FF plug below Min. Extruder 1
43
Error FF plug above Max. Extruder 1
44
Error FF plug below Min. Extruder 2
45
Error FF plug above Max. Extruder 2
46
Max. purge time exceeded. Purge limit 2 not reached. (500)
47
Over heated Extruder plate G01.Q3.E1.TT1
48
Error! Hardware G01.Q3.E1.TT1
49
Over heated Extruder plate G01.Q3.E2.TT1
50
Error! Hardware G01.Q3.E2.TT1
51
Over heated Extruder plate G02.Q3.E1.TT1
52
Error! Hardware G02.Q3.E1.TT1
53
Over heated Extruder plate G02.Q3.E2.TT1
54
Error! Hardware G02.Q3.E2.TT1
55
Max time Return, above SP32
56
Max time, above SP33
57
Bus error or power failure
58
Injection valve G01.Q1 not closed in time
59
Injection valve G02.Q1 not closed in time
60
Injection valve G01.Q1 not open in time
61
Injection valve G02.Q1 not open in time