EasyManua.ls Logo

Icom AT-141 - Section 2 Inside Views

Icom AT-141
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ii
MISCELLANEOUS ITEMS
The following parts are additionally required for instal-
lation, but are not supplied with the AT-141.
Purchase these parts locally.
q AWG 14 × 4 conductor shielded cable
•IcomoffersanoptionalOPC-1465controlcable.
Length: 10 m
w 50 Ω coaxial cable
e Two PL-259 connectors
FEATURES
Weather resistant
The AT-141 is housed in a durable, completely
weather resistant ASA case, with a rubber gasket. The
antenna tuner can be conveniently installed near the
antenna element.
Matches all bands
The AT-141 matches all frequencies on the HF marine
band. For example, the tuner matches a 7 m long-wire
antenna across 1.6–30 MHz.
Full automatic tuning
Just push the [TUNE] key on the transceiver, and the
AT-141 immediately tunes for a minimum SWR on any
frequency in the HF marine band.
HF operation on any size ship
The AT-141 allows HF operation where antenna ele-
ment length is restricted due to space.
Simple installation
Installation is simple. Just connect the control and an-
tenna cables. You never need to open the cover.
45 memories for shorter tuning time
To decrease the tune-up time, the AT-141 automati-
cally stores the matching conditions for up to 45 fre-
quencies. Retuning a memorized frequency takes ap-
proximately 1 second.
Super capacitor for memory backup
Even if the AT-141 is not used for approximately 1
week, the built-in super capacitor backs up the con-
tents of the 45 memories.
Low power tune up
The AT-141 emits low output power during tuning. This
feature reduces the possibility of causing interference
to other stations.
Tuner Through function
The Tuner Through function is built into the AT-141.
This function helps improve receiver gain, depending
on the antenna element length used, and the operat-
ing frequency.
FOREWORD ………………………………………… ii
IMPORTANT …………………………………………… ii
EXPLICIT DEFINITIONS …………………………… ii
PRECAUTIONS ……………………………………… ii
SUPPLIED ACCESSORIES ………………………… ii
MISCELLANEOUS ITEMS………………………… iii
FEATURES ………………………………………… iii
TABLE OF CONTENTS …………………………… iii
1 SYSTEM INSTALLATION ………………………… 1
Five Critical Points for a successful HF
installation ���������������� 1
Vessel ground connection �������� 1
Antenna and tuners ������������ 2
The importance of grounding ������� 2
2 ANTENNA SYSTEM ……………………………… 3
Antenna for ship ������������� 3
Coaxial cable �������������� 4
Ground and counterpoise ��������� 4
3 INSTALLATIONS ………………………………… 5
Installation outline ������������ 5
Control cable �������������� 5
PL-259 connector ������������ 5
Waterproofing the antenna connection ��� 6
Mounting ���������������� 6
Cable connections ������������ 7
4 CONTROL CABLE SIGNALS …………………… 8
Terminal information ����������� 8
Unit description ������������� 9
Specifications �������������� 9
5 UNIT DESCRIPTION AND SPECIFICATIONS 9
6 INSTALLATION EXAMPLE …………………… 10
TABLE OF CONTENTS

Other manuals for Icom AT-141

Related product manuals