Icom IC-208H - Page 25

5 - 7
SOFTWARE ADJUSTMENT (RECEIVING)–Continued
TEMP.
CORRECTION
<High power>
(UHF –10˚C)
[HP–]
(UHF +60˚C)
[HP–]
<Mid. power>
(UHF –10˚C)
[MP–]
(UHF +60˚C)
[MP–]
<Low power>
(UHF –10˚C)
[LP–]
(UHF +60˚C)
[LP–]
PROTECT
SCALE
(VHF)
[PM]
(UHF)
[PM]
PROTECT
POWER
(VHF)
[PP]
(UHF)
[PP]
1
2
3
4
5
6
1
2
1
2
• Operating frequency : 445.0 MHz
• Receiving
• Operating frequency : 445.0 MHz
• Receiving
• Operating frequency : 445.0 MHz
• Receiving
• Operating frequency : 445.0 MHz
• Receiving
• Operating frequency : 445.0 MHz
• Receiving
• Operating frequency : 445.0 MHz
• Receiving
• Operating frequency : 146.0 MHz
• Receiving
• Operating frequency : 445.0 MHz
• Receiving
• Operating frequency : 146.0 MHz
• Receiving
• Operating frequency : 445.0 MHz
• Receiving
•Turn the [DIAL] to set to “F9” on the display.
• Push the [BAND] key.
•Turn the [DIAL] to set to “07” on the display.
• Push the [BAND] key.
•Turn the [DIAL] to set to “00” on the display.
• P0ush the [BAND] key.
•Turn the [DIAL] to set to “00” on the display.
• Push the [BAND] key.
•Turn the [DIAL] to set to “00” on the display.
• Push the [BAND] key.
•Turn the [DIAL] to set to “00” on the display.
• Push the [BAND] key.
•Turn the [DIAL] to set to 130 % on the display.
• Push the [BAND] key.
•Turn the [DIAL] to set to 140 % on the display.
• Push the [BAND] key.
•Turn the [DIAL] to set to 5 W on the display.
• Push the [BAND] key.
•Turn the [DIAL] to set to 5 W on the display.
• Push the [BAND] key.
ADJUSTMENT ADJUSTMENT CONDITION OPERATION