EasyManuals Logo

Icom IC-208H Service Manual

Icom IC-208H
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
1 - 1
SECTION 1 SPECIFICATIONS
All stated specifications are subject to change without notice or obligation.
M GENERAL
• Frequency range :
*
1
Guaranteed 144.000 – 146.000 MHz only, *
2
Guaranteed 144.000 – 148.000 MHz only,
*
3
Guaranteed 430.000 – 440.000 MHz only; *
4
Guaranteed 440.000 – 450.000 MHz only
*
5
Guaranteed 430.000 – 434.000 MHz, 435.000 – 438.000 MHz only; *
6
Not guaranteed range
• Mode : FM, AM (AM range is 118.0 – 135.995 MHz and Rx only for [USA] and [EXP].)
• Number of memory channel : 502 (including 2 call channels)
• Usable temperature range : –10˚C to +60˚C; +14˚F to +140˚F
• Frequency resolution : 5, 10, 12.5, 15, 20, 25, 30, 50, 100 and 200 kHz
• Scan mode : Full, Program, Priority, Memory channel, Bank, Skip and Tone
• Frequency stability : ±10 ppm (–10˚C to +60˚C; +14˚F to +140˚F)
• Power supply requirement : 13.8 V DC ±15 % (negative ground)
• Current drain
(at 13.8 V DC) :
*
1
VHF only (except [KOR]), *
2
[TPE] only
Antenna connector : SO-239 (50 )
• DATA connector : Mini DIN 6 pin
• Dimensions : 141(W)×40(H)×185.4(D) mm; 5
9
16(W)×1
9
16(H)×7
9
32(D) inch (projections not included)
Weight : 1.2 kg; 2 lb 10 oz
M TRANSMITTER
Output power : VHF 55 W (50 W: [KOR], 25W: [TPE])/15 W/5 W (selectable)
UHF 50 W/15 W/5 W (selectable)
Modulation system : Variable reactance frequency
Maximum frequency deviation : ±5.0 kHz
Spurious emissions : Less than 60 dB
Microphone connector : 8-pin modular jack (600 )
M RECEIVER
Receive system : Double-conversion superheterodyne
Intermediate frequency : 1st IF 46.05 MHz
2nd IF 450 kHz
Sensitivity : Less than 0.18 µV (at 12 dB SINAD)
Squelch sensitivity : Less than 0.13 µV (at threshold)
Selectivity : More than 12 kHz/6 dB (Wide); More than 6 kHz/6 dB (Narrow)
Less than 30 kHz/60 dB (Wide); Less than 20 kHz/60 dB (Narrow)
Spurious and image rejection : More than 60 dB
Audio output power
(at 13.8 V) : More than 2.0 W at 10% distortion with an 8 load
External speaker connector : 2-conductor 3.5(d) mm (
1
8")/8
VERSION
[KOR]
[USA]
[AUS]
[TPE]
[EXP]
RX (MHz)
144.000146.000, 430.000440.000
118.000173.995*
2
, 230.000549.995*
4
810.000824.000*
5
, 849.000869.000*
5
894.000999.990*
5
118173.995*
2
, 230.000549.995*
3
,
810.000999.990*
6
144.000146.000, 430.000432.000
118173.995*
2
, 230.000549.995*
3
,
810.000999.990*
6
TX (MHz)
144.000146.000*
2
, 430.000440.000
144.000148.000, 420.000450.000*
4
144.000148.000, 420.000450.000*
3
144.000146.000, 430.000432.000
136.000173.995*
2
, 400.000478.995*
3
VHF UHF
High: 55 W*
1
/50 W/25 W*
2
12 A*
1
/11.5 A/8 A*
2
11.5 A/8 A
TX Middle: 15 W (Approx.) 7.5 A
Low: 5 W (Approx) 5.5 A 5.0 A
RX
Standby 0.8 A
Maximum output power 1.0 A

Other manuals for Icom IC-208H

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Icom IC-208H and is the answer not in the manual?

Icom IC-208H Specifications

General IconGeneral
BrandIcom
ModelIC-208H
CategoryTransceiver
LanguageEnglish

Related product manuals