What to do if Icom Transceiver function display shows errors?
If the function display on your Icom Transceiver is showing erroneous information, it suggests that the CPU is malfunctioning. Reset the CPU.
General| Frequency Range | 144-148 MHz |
|---|---|
| Mode | FM |
| Antenna Connector | SO-239 |
| Weight | 1.2 kg |
| Power Supply Requirement | 13.8 V DC |
| Dimensions | 140 x 40 x 160 mm |
| Current Consumption | 15A (at 65W output) |
| Number of Channels | 207 (200 regular, 6 scan edges, 1 call) |
Overview of the service manual for the IC-2200H VHF transceiver.
Critical safety warnings for operating the transceiver.
Essential guidelines for safe and effective transceiver repair.
Detailed electrical and performance specifications for the transceiver.
Performance metrics for the transceiver's receiver section.
Top and bottom views of the IC-2200H main unit components.
Component layout for the HM-133V microphone.
Detailed explanation of the transceiver's receiver circuitry.
Detailed explanation of the transceiver's transmitter circuitry.
Procedures for adjusting frequency, power, deviation, and sensitivity.
Step-by-step guide for frequency and transmit power adjustments.
Step-by-step guide for receiver sensitivity and squelch adjustments.
To Next Page
