2-2
2
ADVANCED OPERATIONS
Measuring SWR
The IC-718 has a built-in circuit to measure antenna SWR�
No external equipment or special adjustments are necessary�
1� Confirm that the output power is over 30 W�
2� Push [SET] to display the SWR meter�
• “SWR” is displayed�
SWR
indicator
3� Push [MODE] to select CW or RTTY mode�
4� Push down the Key or push [PTT] to transmit, and
then read the actual SWR from the meter�
•
•
and so on�
Adjust the SWR into this range�
To Next Page
Loading...
