Icom IC-80AD - TRANSMIT POWER ADJUSTMENT (at 13.5 V)

5 - 7
5-8 TRANSMIT POWER ADJUSTMENT (at 13.5 V)
Select an adjustment item using [2] / [8], then set the adjustment value as specifi ed using [DIAL].
ADJUSTMENT
ADJUSTMENT
ITEM
OPERATION VALUE
TRANSMIT POWER
–
1 1) Set the power supply voltage to 13.5 V.
(supplying from [DC IN])
2) Connect an RF power meter to the antenna connector.
–
(Hi power)
[VHF (BAND LOW)]
[PO1]
2• While transmitting, adjust the TX power using [DIAL], then push
[BAND] to store the adjustment value.
4.8–5.2 W
[VHF (BAND HIGH)]
3
(Hi power)
[UHF (BAND LOW)]
4
5.0–5.4 W
[UHF (BAND HIGH)]
5 4.6–5.0 W
(Mid power)
[VHF (BAND LOW)]
6
2.3–2.7 W
[VHF (BAND HIGH)]
7
(Mid power)
[UHF (BAND LOW)]
8
[UHF (BAND HIGH)]
9
(Low power)
[VHF (BAND LOW)]
10
0.4–0.6 W
[VHF (BAND HIGH)]
11
(Low power)
[UHF (BAND LOW)]
12
[UHF (BAND HIGH)]
13
(S-Low power)
[VHF (BAND LOW)]
14
80–120
mW
[VHF (BAND HIGH)]
15
(S-Low power)
[UHF (BAND LOW)]
16
[UHF (BAND HIGH)]
17
All manuals and user guides at all-guides.com