Icom IC-9700 - 4-2 FRONT PANEL OPERATION verification

4-4
4-2 FRONT PANEL OPERATION VERIFICATION
1. Touch [FRONT] on the main adjustment menu screen.
2. Touch [KEYch] to enter to the key operation verification mode.
3. Follow the instructions displayed on the screen, and push the corresponding key.
4. Follow the instructions displayed on the screen, and turn the corresponding dial and sensor.
5. Follow the instructions displayed on the screen, and insert/remove the SD card.
6. Follow the instruction displayed on the screen, and verify the corresponding LED is lit.
7. 
maximum backlight brightness.
8. 
displayed on the screen.
9. Push [EXIT] to return to the main adjustment menu screen.