Icom IC-9700 - DR Mode Operations

Cmd. Sub cmd. Data Description
1A* 05 0027 0000 ~ 0255 SET > Function > Beep Level
(0000=Minimum to 0255=Maximum)
0028 00 or 01 SET > Function > Beep Level Limit
(00=OFF, 01=ON)
0029 00 or 01 SET > Function > Beep (Conrmation)
(00=OFF, 01=ON)
0030 00 or 01 SET > Function > Band Edge Beep
(00=OFF, 01=ON)
( ON = Beep sounds with a default amateur
band)
02 SET > Function > Band Edge Beep
(02=ON (User))
03 SET > Function > Band Edge Beep
(03=ON (User) & TX Limit)
0031 0050 ~ 0200 SET > Function > Beep Sound (MAIN)
(0050=500 Hz to 0200=2000 Hz)
0032 0050 ~ 0200 SET > Function > Beep Sound (SUB)
(0050=500 Hz to 0200=2000 Hz)
0033 00 or 01 SET > Function > Sub Band Mute (TX) >
Speaker/Phones
(00=OFF, 01=ON)
0034 00 or 01 SET > Function > Sub Band Mute (TX) > USB
(00=OFF, 01=ON)
0035 00 or 01 SET > Function > Sub Band Mute (TX) > LAN
(00=OFF, 01=ON)
0036 00 to 02 SET > Function > RF/SQL Control
(00=Auto, 01=SQL, 02=RF+SQL)
0037 00 or 01 SET > Function >
FM/DV Center Error function
(00=OFF, 01=ON)
0038 00 to 05 SET > Function > TX Delay > 144M
(00=OFF, 01=10 ms, 02=15 ms,
03=20 ms, 04=25 ms, 05=30 ms)
0039 00 to 05 SET > Function > TX Delay > 430M
(00=OFF, 01=10 ms, 02=15 ms,
03=20 ms, 04=25 ms, 05=30 ms)
0040 00 to 05 SET > Function > TX Delay > 1200M
(00=OFF, 01=10 ms, 02=15 ms,
03=20 ms, 04=25 ms, 05=30 ms)
0041 00 to 05 SET > Function > Time-Out Timer
( 00=OFF, 01=3 min., 02=5 min., 03=10 min.,
04=20 min., 05=30 min.)
0042 00 or 01 SET > Function > PTT Lock
(00=OFF, 01=ON)
0043 00 or 01 SET > Function > SPLIT > Quick SPLIT
(00=OFF, 01=ON)
( Setting the [SPLIT] key operation when it is
held down for 1 second.)
0044 See p. 16 SET > Function > SPLIT > FM SPLIT Offset
0045 00 or 01 SET > Function > SPLIT > SPLIT LOCK
(00=OFF, 01=ON)
0046 00 or 01 SET > Function > Auto Repeater
( 00=OFF,
01=ON (DUP,TONE) for USA version)
0047 00 to 02 SET > Function > RTTY Mark Frequency
(00=1275 Hz, 01=1615 Hz, 02=2125 Hz)
0048 00 to 02 SET > Function > RTTY Shift Width
(00=170 Hz, 01=200 Hz, 02=425 Hz)
0049 00 or 01 SET > Function > RTTY Keying Polarity
(00=Normal, 01=Reverse)
0050 00 or 01 SET > Function > SPEECH >
SPEECH Language
(00=English, 01=Japanese)
0051 00 or 01 SET > Function > SPEECH > Alphabet
(00=Normal, 01=Phonetic Code)
0052 00 or 01 SET > Function > SPEECH >
SPEECH Speed
(00=Slow, 01=Fast)
0053 00 to 02 SET > Function > SPEECH >
RX Call Sign SPEECH
(00=OFF, 01=ON (Kerchunk), 02=ON (All))
0054 00 or 01 SET > Function > SPEECH >
RX>CS SPEECH
(00=OFF, 01=ON)
0055 00 or 01 SET > Function > SPEECH >
S-Level SPEECH
(00=OFF, 01=ON)
D Command table (Continued)
Cmd. Sub cmd. Data Description
1A* 05 0056 00 or 01 SET > Function > SPEECH >
MODE SPEECH
(00=OFF, 01=ON)
0057 0000 ~ 0255 SET > Function > SPEECH > SPEECH Level
(0000=0% to 0255=100%)
0058 00 or 01 SET > Function > [SPEECH/LOCK] Switch
(00=SPEECH/LOCK, 01=LOCK/SPEECH)
0059 00 or 01 SET > Function > Lock Function
(00=MAIN DIAL, 01=PANEL)
0060 00 or 01 SET > Function > Memo Pad Quantity
(00=5 ch, 01=10 ch)
0061 00 to 02 SET > Function > MAIN DIAL Auto TS
(00=OFF, 01=Low, 02=High)
0062 00 or 01 SET > Function > MIC Up/Down Speed
(00=Slow, 01=Fast)
0063 00 or 01 SET > Function > AFC Limit
(00=OFF, 01=ON)
0064 00 to 02 SET > Function > [NOTCH] Switch (SSB)
(00=Auto, 01=Manual, 02=Auto/Manual)
0065 00 to 02 SET > Function > [NOTCH] Switch (AM)
(00=Auto, 01=Manual, 02=Auto/Manual)
0066 00 or 01 SET > Function >
SSB/CW Synchronous Tuning
(00=OFF, 01=ON)
0067 00 or 01 SET > Function > CW Normal Side
(00=LSB, 01=USB)
0068 00 or 01 SET > Function > Screen Keyboard Type
(00=Ten-key, 01=Full Keyboard)
0069 00 to 02 SET > Function >
Screen Full Keyboard Layout
(00=English, 01=German, 02=French)
0070 00 or 01 SET > Function >
Screen Capture [POWER] Switch
(00=OFF, 01=ON)
0071 00 or 01 SET > Function > Screen Capture File Type
(00=PNG, 01=BMP)
0072 0000 ~ 0255 SET > Function > REF Adjust
(0000=0%, 0255=100%)
0073 0000 ~ 0255 SET > Function > REF Adjust (FINE)
(0000=0%, 0255=100%)
0074 00 to 03 SET > DV/DD Set > Standby Beep
( 00=OFF, 01=ON, 02=ON (to me: High Tone),
03=ON (to me: Alarm/High Tone))
0075 00 to 02 SET > DV/DD Set > Auto Reply
(00=OFF, 01=ON, 02=Voice)
0076 00 or 01 SET > DV/DD Set > DV Data TX
( 00=PTT 01=Auto)
0077 00 or 01 SET > DV/DD Set > DV Fast Data > Fast Data
(00=OFF, 01=ON)
0078 00 or 01 SET > DV/DD Set > DV Fast Data >
GPS Data Speed
(00=Slow, 01=Fast)
0079 00 to 10 SET > DV/DD Set > DV Fast Data >
TX Delay (PTT)
(00=OFF, 01=1 sec. to 10=10 sec.)
0080 00 to 02 SET > DV/DD Set > Digital Monitor
(00=Auto, 01=Digital, 02=Analog)
0081 00 or 01 SET > DV/DD Set > Digital Repeater Set
(00=OFF, 01=ON)
0082 00 or 01 SET > DV/DD Set > DV Auto Detect
(00=OFF, 01=ON)
0083 00 or 01 SET > DV/DD Set > RX Record (RPT)
(00=ALL, 01=Latest Only)
0084 00 or 01 SET > DV/DD Set > BK
(00=OFF, 01=ON)
0085 00 or 01 SET > DV/DD Set > EMR
(00=OFF, 01=ON)
0086 0000 ~ 0255 SET > DV/DD Set > EMR AF Level
(0000=0%, 0255=100%)
0087 00 or 01 SET > DV/DD Set >
DD TX Inhibit (Power ON)
(00=OFF, 01=ON)
0088 00 or 01 SET > DV/DD Set > DD Packet Output
(00=Normal, 01=All)
0089 00 or 01 SET > QSO/RX Log > QSO Log
(00=OFF, 01=ON)
Remote control
6