Icom IC-A22 Instruction Manual

4 MEMORY OPERATION
i Programming a memory
channel
You can program the following data into each memory
channel separately.
© Operating frequency (pgs. 11, 12)
© 6 digit comment (p. 15)
Lockout and duplex* information (pgs. 18, 25)
@® Set the desired frequency in frequency mode:
~Push [CLR] to select frequency mode; or, push [F] then
[ENT-WX] to select a weather channel."
Set the desired frequency or weather channel* using the
tuning dial or keypad.
@ Push [F] then [MR-MW].
© "M" blinks.
@ Select the memory channel (01-50) to be programmed
using the tuning dial or keypad.
@ Push [MR] to enter the frequency and to write a com-
ment; push [ENT] to program the frequency and to skip
writing a comment.
Push [ENT] to program a weather channel." A comment
cannot be programmed with a weather channel.
Push [CLR] to cancel programming.
© Set a desired comment as described at right.
© Push [ENT] to program.
* Weather channel and duplex function: U.S.A. version only.
i Programming a comment
The memory channel can display a 6-character comment
as well as a frequency.
@® Set the desired frequency in frequency mode.
@® Push [F] then [MR-MW].
@ Select the memory channel to be programmed.
@ Push [MR] to enter the frequency.
© Push the appropriate digit key several times to select the
desired character as listed below.
@]7.e.R8/@/atuv|@lawxy
(ENT) | Program | (Co) | 0, Space Hyphen*"
*' Hyphen is selectable between the 3rd and 4th digits only.
@© Push [ENT] to program.
PROGRAMMING NOTES
« Pushing [A] or [‘W] moves the cursor.
«To input characters in the same group, use [A] to
move the cursor.
To clear the entered comment, push [CLR] before
pushing [ENT].
Wi—ow WWW {i

Icom IC-A22 Specifications

General

Brand	Icom
Model	IC-A22
Category	Transceiver
Language	English