5
2
PANEL DESCRIPTION
!7 DIGIT KEYS
➥ Input the specified digit during frequency input, memory
channel selection, etc.
➥ In addition, each key has one or more secondary func-
tion after pushing as follows:
Push
,
then push [0•
BANK], and rotate [DIAL] to
select the memory BANK number during the mem-
ory operation. (p. 12)
Push , then push [1•
DVOR] to select the DVOR
display from the CDI display in NAV band. (p. 19)*
1
➥ Push , then push [2•TO] to change the
course indicator characteristics to “TO” flag in
the DVOR display in NAV band. (p. 19)*
1
➥ Corrects the deviation while using “TO” flag.*
1
➥ Push , then push [3•FROM] to change the
course indicator characteristics to “FROM” flag
in the DVOR display in NAV band. (p. 19)*
1
➥ Corrects the deviation while using “FROM” flag.*
1
Push , then push [4•CDI] to select the CDI dis-
play from the DVOR display in NAV band. (p. 19)*
1
Push , then push [5•DUP-W] to set the duplex
frequency in NAV band. (p. 24)*
1
Push , then push [6•DUP] to turn the duplex
function ON/OFF in NAV band. (p. 24)*
1
Push , then push [7• ] to turn the key lock
function ON/OFF. (p. 11)
Push , then push [8•
BEEP] to turn the beep
tone setting mode ON. (p. 11)
• Adjustable level; 0 to 9
Push , then push [9•TAG] to set the displayed
memory as a “TAG” channel. (p. 17)
*
1
These functions available on the IC-A24E only.
2
To Next Page
Loading...
Need help?
General
