8
2
BASIC OPERATION
User Set mode
■
The User Set mode allows you to set seldom-changed set-
tings. If the transceiver has [User Set Mode] assigned to it,
you can “customize” the transceiver operation to suit your
preferences and operating style.
Entering the User Set mode:
Hold down [User Set Mode] for 1 second to enter the User q
Set mode.
Push [User Set Mode] several times to select the appro- w
priate item. Then push [CH Up] or [CH Down] to set the
desired level/condition.
•SelectableSetmodeitemsareBacklight, Beep ON/OFF, Beep
Level, Ringer Level, SQL Level, AF Min Level, Mic Gain,
Horn, Battery Voltage, Signal Moni, Lone Worker and Sys-
tem Info.
Hold down [User Set Mode] for 1 second again to exit the e
User Set mode.
Priority A channel selection
■
When one of the following operations is performed, the trans-
ceiver automatically selects the Priority A channel.
• Turning ON the power
The Priority A channel is selected each time the transceiv-
er power is turned ON.
• Auto Reset
The Priority A channel is selected when the Auto Reset
timer ends.
• OFF hook
The Priority A channel is selected when you take the mi-
crophone OFF hook.
To Next Page
Loading...
Need help?
General
