16
4
OPTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
•RMK-2 s e pa r at i o n k i t +
OPC-607/OPC-608/OPC-609/OPC-726
s e pa r at i o n c a b l e
Allows you to install the transceiver front panel separately
from the main unit for operating convenience.
•SP-22/SP-30/SP-35/SP-35L
e x t e r n a l s p e a k e r s
Input impedance : 4 ø
SP-22/SP-35/SP-35L: Rated input; 5 W, Max. input; 7 W
SP-30: Rated input; 20 W, Max. input; 30 W
•HM-152/HM-152T/HM-148G/HM-148T
h a n d m i c r o p h o n e s
HM-152 : Hand microphone
HM-152T : DTMF microphone
HM-148G : Self ground heavy duty microphone
HM-148T : Self ground heavy duty DTMF microphone
The 10-keypad of this microphone can be used
for the DTMF code transmission only.
•SM-25
d e s k t o p m i c r o p h o n e
• OPC-1132A/OPC-347 d c p o w e r c a b l e s
OPC-1132A : 3 m (9.8 ft)
OPC-347 : 7 m (23 ft)
• OPC-1532/OPC-1871
z o n e c o p y c a b l e s
OPC-1532 : Mobile to mobile zone copy cable.
OPC-1871 : Mobile to handy zone copy cable.
•MB-77
w a l l m o u n t b r a c k e t
• UT-125 a e s /d e s e n c r y p t i o n u n i t
• UT-128 d e s e n c r y p t i o n u n i t
Approved Icom optional equipment is designed for optimal
performance when used with an Icom transceiver.
Icom is not responsible for the destruction or damage to an
Icom transceiver in the event it is used with equipment that
is not manufactured or approved by Icom.
Some options may not be available in some countries. Please
ask your dealer for details.
To Next Page
Loading...
Need help?
General
