Push [CALL] to select the call chan-
nel.
Push [CALL] again for 3 sec. (until
long beep changes to 2 short
beeps) to enter call channel pro-
gramming condition.
•
Push [Y]/[Z] to select the desired
channel.
Push [CALL] to program the dis-
played channel as the call channel.
iGM1600E
USING CHANNEL 16
q
w
e
r
Call channel number to be pro-
grammed flashes.
The call channel number stop
flashing.
"CALL" and call channel number
appear.
25
13
QUICK REFERENCE
Important operating instructions are summed up in this and the following
page for your simple reference.
By cutting along the line and folding on the dotted line, it will become a card
sized operating guide which can easily be carried in a card case or wallet,
etc.
<CUT HERE>
To Next Page
Loading...
