Icom ic-m423g

34
7
DSC OPERATION
■ Making DSC calls
Making an Individual Acknowledgement (continued) D
Manual ACK:
Enter “INDIVIDUAL ACK” in the DSC CALLS menu. q
MENU ➪ DSC Calls ➪ Individual ACK
(Push [MENU].) (Rotate Dial, then push [ENT].)
 •WhennoIndividualcallhasbeenreceived,theIndividualACK
item will not be displayed.
Select a desired individual address or ID code to reply to, w
using Dial or [Y]/[Z], then push [ENT].
 •Push[EXIT]toreturntothenormaloperatingmode.
 •Push[BACK]toreturntothepreviousscreen.
Do steps e e to u, as described in “Quick ACK:,” beginning
on the previous page.
Making a D Group call
The Group call function allows you to make a DSC signal to
only a specific group.
Enter “GROUP CALL” in the DSC CALLS menu. q
MENU ➪ DSC Calls ➪ Group Call
(Push [MENU].) (Rotate Dial, then push [ENT].)
Select a desired preset group address or “Manual Input,” w
using Dial or [Y]/[Z], then push Dial or [ENT].
 •TheIDcodefortheGroupcallcanbeenteredrst.(p.22)
 •When“ManualInput”isselected,enterthe8digitIDcodeforthe
group you wish to call.
 •Push[EXIT]toreturntothenormaloperatingmode.
 •Push[BACK]toreturntothepreviousscreen.
+ Continued on the next page.