Icom ic-m424g - DSC Operation: Manual Position Report Replies; Manually Replying to Position Reports

50
7
DSC OPERATION
New2001
■ Making DSC calls
Making a Position Report Reply call (continued) D
Manual Reply:
Enter “REPORT REPLY” in the DSC CALLS menu. q
 •IfnoPositionReportRequestcallisreceived,thePositionRe-
port Reply item will not be displayed.
 •Push[EXIT]toreturntothenormaloperatingmode.
 •Push[BACK]toreturntothepreviousscreen.
Select a desired Position Report Request call to reply to, w
using Dial or [Y]/[Z], then push Dial or [ENT].
The Position Report Reply call confirmation screen is dis- e
played.
Push [CALL] to make an acknowledgement call.
While transmitting the reply call, the screen shown below r
is displayed, and then returns to the normal operating
mode.
MENU ➪ DSC Calls ➪ Position Report Reply
(Push [MENU].) (Rotate Dial, then push [ENT].)