EasyManua.ls Logo

Icom IC-M401E User Manual

Icom IC-M401E
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
VHF MARINE TRANSCEIVER
iC-m401e
SERVICE
MANUAL
Question and Answer IconNeed help?

Do you have a question about the Icom IC-M401E and is the answer not in the manual?

Icom IC-M401E Specifications

General IconGeneral
TypeMarine VHF Transceiver
Waterproof RatingIPX7
ModeFM
Antenna Impedance50 Ω
Receiver Sensitivity0.25μV (12dB SINAD)
Operating Temperature-15°C to +55°C
ModulationFM
Output Power25 W
ChannelsUSA, INT, CAN channels
Power Supply13.8 V DC
Current Drain1.5 A (at 1 W)
Spurious Emissions< -70 dBc
Frequency Stability±10 ppm
Adjacent Channel Selectivity70 dB
Spurious Response70 dB
Intermodulation Rejection> 70 dB
Adjacent Channel Power> 70 dB

Summary

INTRODUCTION

DANGER

Safety Precautions

Critical safety warnings and precautions for operating the transceiver.

SECTION 1 SPECIFICATIONS

SECTION 2 INSIDE VIEWS

MAIN-E UNIT

Identifies major components on the main unit board.

FRONT UNIT

Identifies major components on the front unit.

SECTION 3 DISASSEMBLY INSTRUCTIONS

REMOVING THE CASE

Steps for removing the transceiver's outer casing.

REMOVING THE MAIN-E UNIT

Steps for detaching the main internal unit.

SECTION 4 CIRCUIT DESCRIPTION

4-1 RECEIVER CIRCUITS

Details the signal path for receiving.

4-2 TRANSMITTER CIRCUITS

Details the signal path for transmitting.

4-3 PLL CIRCUITS

Explains the Phase Locked Loop system.

4-4 ATIS AND DSC CIRCUITS

Covers ATIS and DSC signal processing.

4-5 LOGIC CIRCUITS

Describes the logic and CPU functions.

4-6 POWER SUPPLY CIRCUITS

Details the power supply voltage lines.

4-7 PORT ALLOCATIONS

Lists CPU and I/O expander port assignments.

SECTION 5 ADJUSTMENT PROCEDURES

5-1 PREPARATION

Lists required test equipment and connections.

5-2 PLL ADJUSTMENTS

Procedures for adjusting PLL lock voltage and frequency.

5-3 TRANSMITTER ADJUSTMENTS

Procedures for output power and deviation adjustment.

5-4 RECEIVER ADJUSTMENTS

Procedures for sensitivity and squelch adjustment.

SECTION 6 PARTS LIST

IC-M401E MAIN-E UNIT Parts

Component list for the main unit.

IC-M401E LOGIC-E BOARD Parts

Component list for the logic board.

IC-M401E VR BOARD Parts

Component list for the VR board.

IC-M401E SQL BOARD Parts

Component list for the SQL board.

IC-M401E FRONT UNIT Parts

Component list for the front unit.

IC-M401E CHASSIS UNIT Parts

List of chassis components.

HM-132 Microphone Parts

Component list for the microphone.

SECTION 7 MECHANICAL PARTS AND DISASSEMBLY

IC-M401E Chassis Mechanical Parts

Lists mechanical components for the chassis.

IC-M401E Logic-E Board Mechanical Parts

Lists mechanical components for the logic board.

IC-M401E VR Board Mechanical Parts

Lists mechanical components for the VR board.

IC-M401E SQL Board Mechanical Parts

Lists mechanical components for the SQL board.

IC-M401E Main-E Unit Mechanical Parts

Lists mechanical components for the main unit.

IC-M401E Accessories

Lists mechanical accessories.

IC-M401E Front Unit Mechanical Parts

Lists mechanical components for the front unit.

HM-132 Microphone Mechanical Parts

Lists mechanical components for the microphone.

SECTION 8 SEMI-CONDUCTOR INFORMATION

TRANSISTOR AND FET'S

Diagrams and symbols for transistors and FETs.

DIODES

Diagrams and symbols for diodes.

SECTION 9 BOARD LAYOUTS

VR Board Layout

Top and bottom views of the VR board.

SQL Board Layout

Top and bottom views of the SQL board.

HM-132 Board Layout

Top and bottom views of the HM-132 board.

Logic-E Board Layout

Top and bottom views of the Logic-E board.

Main-E Unit Board Layout

Top and bottom views of the Main-E unit board.

SECTION 10 BLOCK DIAGRAM

SECTION 11 VOLTAGE DIAGRAM

Logic-E Board Voltage Diagram

Shows voltage distribution on the logic board.

Main-E Unit Voltage Diagram

Shows voltage distribution on the main unit.

HM-132 Voltage Diagram

Shows voltage distribution on the HM-132.

Related product manuals