EasyManua.ls Logo

Icom IC-M700 User Manual

Icom IC-M700
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Question and Answer IconNeed help?

Do you have a question about the Icom IC-M700 and is the answer not in the manual?

Icom IC-M700 Specifications

General IconGeneral
BrandIcom
ModelIC-M700
CategoryTransceiver
LanguageEnglish

Summary

SECTION 1 SPECIFICATIONS

GENERAL SPECIFICATIONS

Key specifications for the radio's general characteristics, including frequency coverage and power requirements.

RECEIVER SPECIFICATIONS

Detailed specifications for the receiver section, covering modes, IF, sensitivity, and selectivity.

TRANSMITTER SPECIFICATIONS

Specifications for the transmitter, including emission modes, output power, and suppression levels.

SECTION 2 FEATURES

MEMORY CHANNELS AND MODES

Capability to store 48 channels and access all radiotelephone transmission modes.

COVERAGE AND AUDIO QUALITY

Comprehensive marine band coverage and superior audio output from a heavy-duty speaker.

ADDITIONAL OPERATIONAL FEATURES

Other functionalities like clarifier, squelch, noise blanker, and modern digital readout.

SECTION 3 INSTALLATION

UNPACKING AND PLANNING

Instructions for safely unpacking the unit and selecting an optimal installation location.

MOUNTING THE TRANSCEIVER

Guidance on securely mounting the transceiver using the provided universal bracket and hardware.

TYPICAL INSTALLATION

Illustrates a standard installation setup with antenna, ground, and connections.

PRIMARY POWER AND EXTERNAL SPEAKER

Details on connecting the power supply and an external speaker for optimal operation.

SECTION 4 OPERATING CONTROLS

FRONT PANEL CONTROLS

Comprehensive overview of all buttons, switches, and displays on the front panel for operation.

REAR PANEL CONNECTIONS

Explanation of all rear panel connectors for antennas, power, speakers, and other peripherals.

SECTION 5 OPERATING INSTRUCTIONS

HOW TO TUNE AND CHANNEL SELECTION

Procedures for tuning into frequencies and selecting memorized channels using group and channel switches.

MEMORY WRITING

Step-by-step guide on how to rewrite or write new frequencies into memory channels.

RECEIVING AND TRANSMITTING OPERATIONS

Instructions for operating the radio in receive and transmit modes, including PTT usage.

ANTENNA TUNER OPERATION

Guidance on using the antenna tuner (antenna coupler) for optimal signal matching.

ALARM FUNCTION OPERATION

Detailed procedures for testing and transmitting alarm signals using the optional unit.

SECTION 6 CIRCUIT DESCRIPTION

RECEIVER CIRCUITS

Detailed explanation of the receiver's RF, IF, detection, and noise blanker circuits.

TRANSMITTER CIRCUITS

Description of the transmitter's balanced modulator, IF, RF, PA protection, and ALC circuits.

POWER SUPPLY AND PLL CIRCUITS

Overview of the power supply and Phase-Locked Loop (PLL) circuits for frequency generation.

LOGIC AND CONTROL CIRCUITS

Explanation of the logic control circuits, front panel, MIC unit, and other peripheral circuits.

SECTION 7 BLOCK DIAGRAM

SYSTEM BLOCK DIAGRAM

A visual representation of the entire radio system's interconnected functional blocks.

Related product manuals