Do you have a question about the Icom IC-M700TY and is the answer not in the manual?
Type | Marine SSB Transceiver |
---|---|
Frequency Range | 1.6 - 30 MHz |
Power Output | 150 W (PEP) |
Power Supply | 13.8 V DC |
Modes | CW |
Receiver Sensitivity | 0.5 µV (SSB, 10dB S/N) |
Covers frequency coverage, control, readout, stability, memory, power, current, impedance, weight, and dimensions.
Details emission modes, RF output, spurious emissions, carrier suppression, sideband, and microphone requirements.
Outlines receive system, modes, intermediate frequencies, sensitivity, selectivity, and audio output.
Describes the 64 programmable memory channels for flexible operation.
Highlights the quartz-locked, rock-solid synthesized tuning system for superb stability.
Covers communication in SSB, AM, CW, FSK and access to all HF channels.
Details the 100% duty cycle capability and the standard emergency alarm circuit on 2182kHz.
Lists additional features like clarifier, squelch, noise blanker, and optional accessories.
Instructions for unpacking, inspecting for damage, and selecting a suitable location for the transceiver.
Guidance on using the universal bracket for mounting, ensuring sufficient support and proper placement.
Illustrates a typical installation with grounding and antenna tuner, and provides primary power connection guidelines.
Details connections for external speakers, CW keys, and accessory connectors for FSK and other functions.
Explains how to set up and adjust the antenna tuner connector and tuning power.
Covers configuration of CW break-in modes and FSK shift, polarity, filter, and offset settings.
Describes the initial set of controls on the front panel, including power, T/R, squelch, and volume.
Details the remaining front panel controls like frequency display, channel selection, clarity, and mode switches.
Details the purpose and connection of each connector found on the rear panel of the transceiver.
Step-by-step guide on how to store and change frequencies in the transceiver's memory channels.
Instructions on setting controls and operating the transceiver for receiving signals.
Guidance on transmitting in USB, LSB, AM, CW, and FSK modes, including PTT and manual operation.
Explains how to test and transmit distress signals using the emergency alarm function on 2182kHz.
Details the AT-120 Automatic Antenna Tuner for maximizing antenna system efficiency.
Describes the MN-100 and MN-100L Antenna Matchers for various antenna types.
Information on the SP-15 External Speaker and IC-HS2 Telephone Handset for enhanced audio and privacy.