EasyManua.ls Logo

Icom IC-M802 - I Distress Call; I Distress Relay Call

Icom IC-M802
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2001 NEW
39
8
WHEN RECEIVING A CALL
8
Distress call
q When receiving a distress call, an emergency
alarm sounds and the display below appears.
w Push [CANCEL/CALL] to stop the alarm, if desired.
One distress call sequence is sent 5 times repeatedly
within approx. 30 sec. The emergency alarm sounds at
each reception.
e Push [ENT] to set the transceiver to the distress
phone frequency, then monitor the communication
from the coast station to the ship in distress.
r Select the received distress call memory channel
to check the position of the ship in distress.
Push [FREQ/CH] then [RX
CLAR
] to select RX
memory screen.
Select Distress with [CH] then push
[ENT].
Push [ENT] again.
The received distress call memory is displayed at
the top line with * symbol.
When the ship is close to you, communication should
be monitored continuously.
The trafc frequency is monitored even when the mem-
ory contents is displayed.
******
RX
memory
*******
-------
Distress
-------
Distress
ID:123456789
Undesignated
Position:Lat
34
34'N
Lon134
34'W
UTC
12:34
Traffic:J3E
TX
2182.0kHz
RX
2182.0kHz
RX
Freq:TX
2187.5kHz
RX
2187.5kHz
DEL
OKCancel
RX
J3E
<
Traffic
>
Lat
34
34'N
Lon135
34'E
12:34
SP
Exit
GPS
************************
*
Distress
*
*
123456789
*
************************
TrafficExit
q When receiving a distress relay call, an emergency
alarm sounds and the display below appears.
w Push [CANCEL/CALL] to stop the alarm, if desired.
e Push [ENT] to set the transceiver to the distress
phone frequency, then monitor the communication
from the coast station to the ship in distress.
r Select the received distress call memory channel
to check the position of the ship in distress.
Push [FREQ/CH] then [RX
CLAR
] to select RX
memory screen.
Select Others with [CH] then push [ENT].
Push [ENT] again.
The received distress relay call memory (DTRS
RLY) is displayed at the top line with * symbol.
When the ship is close to you, communication should
be monitored continuously.
The trafc frequency is monitored even when the mem-
ory contents is displayed.
******
RX
memory
*******
-----
Distress
RLY
-----
From:001234567
Distress
ID:123456789
To
all
ships
Undesignated
Position:Lat
34
34'N
Lon134
34'W
UTC
12:34
Traffic:J3E
TX
2182.0kHz
RX
2182.0kHz
RX
Freq:TX
2187.5kHz
RX
2187.5kHz
DEL
OKCancel
RX
J3E
<
Traffic
>
Lat
34
34'N
Lon135
34'E
12:34
SP
Exit
GPS
************************
*
Distress
RLY
*
*
001234567
*
************************
TrafficExit
Distress relay call
IC-M802_USA.qxd 02.5.30 11:40 Page 39

Table of Contents

Other manuals for Icom IC-M802

Related product manuals