EasyManua.ls Logo

Icom IC-T90 - Setting a frequency

Icom IC-T90
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
3
BATTERY CHARGING
Regular charging
Prior to using the transceiver for the first time, the battery
pack must be fully charged for optimum life and operation.
CAUTION: To avoid damage to the transceiver, turn the
transceiver OFF while charging.
Recommended temperature range for charging:
+32°F to +95°F; 0°C to +35°C
Use the wall charger* (BC-110AR/D/DR) only. NEVER use
another manufactures charger.
* Not supplied with some versions.
An optional cable CP-19 (for 12 V cigarette lighter socket)
can be used instead of the AC adapters of the above charg-
ers.
D Battery indicators
The battery indicators blink while charging but do not indicate
the power condition.
CHG_F appears when the charging is completed. Discon-
nect the wall charger in this case.
q Attach the battery pack to the transceiver.
w Be sure to turn the transceiver power OFF.
e Connect the AC adapter* (BC-110AR/D/DR) as shown
below.
* Not supplied with some versions.
r Remove any cables from the [DC11V] jack.
Charging period: 15 hours (w/BP-217)
ee
BATTERY CHARGING
IC-T90A with BP-217
BC-110AR/D/DR
to AC outlet
CP-19
(optional)
to
DC power
jack
to a 12 V
cigarette lighter
socket
IC-T90A_IM.qxd 02.6.6 08:44 AM Page 17 (1,1)

Table of Contents

Related product manuals