Icom ID-4100A

5-5
4-2 TRANSMIT ADJUSTMENTS (continued)
Select an adjustment item using [MONI]/[QUICK], and then set the adjustment value as specified using [DIAL].
ADJUSTMENT ITEM TRANSCEIVER'S DISPLAY CONDITION VALUE
FM DEVIATION
BALANCE
UHF
32
• Connect the test equipment to the antenna
connector through the attenuator, and set
as shown below:
HPF: OFF
LPF: 20 kHz
De-emphasis: OFF
Detector: (P−P)/2
• No audio is applied to [MIC].
• Transmit.
±4.3 kHz
33
±2.15 kHz
34
±4.3 kHz
35
±2.15 kHz
36
±4.3 kHz
37
±2.15 kHz
DIGITAL
MODULATION
VHF
38
±1.05 kHz
39
40
DIGITAL
MODULATION
BALANCE
VHF
41
Minimum deviation
42
43
DIGITAL
MODULATION
UHF
44
±1.05 kHz
45
46
DIGITAL
MODULATION
BALANCE
UHF
47
Minimum deviation
48
49
NOTE: The displayed adjustment frequency is only an example, and the frequency will differ depending on the transceiver version.