Icom IF-3002 - Page 44

39
6
OPTIONS
D Turning the VOX function ON or OFF
The VOX function can be turned ON or OFF when turning the trans-
ceiver power ON.
q Rotate [VOL] to turn the trans-
ceiver power OFF.
w Set [ROTARY SELECTOR] to
any channel other than Chan-
nel 16.
e While pushing and holding
[Upper], turn the transceiver
power ON to switch the VOX
function ON or OFF.
• 1 beep sounds when the VOX
function is turned OFF.
• 2 beeps sound when the VOX
function is turned ON.
NOTE: This operation may not be available, depending on the
presetting. Ask your dealer for details.
[VOL]
[Upper]
[ROTARY SELECTOR]