©2014 Icom America Inc. Page 11
Icom America, Inc.
12421 Willows Road NE
Kirkland, WA 98034
2. Enter Group 1 in the Name (No.:) field.
3. Ensure Call Type is set to Group.
4. Enter 0001 as Destination ID and click Apply tab.
5. Enter Roger (example) for Name below No.: 2.
6. Select Individual as the Call Type.
7. Enter 0001 as Destination ID and click Apply.
All other Groups and Radios information should be entered into the IP1000C controller in a
similar way.
8. After adding all Groups and Radio ID information, Verify that ID List Entries (setting
Number1) shows all Group and Radios ID’s that you just added.
To Next Page
Loading...
