©2014 Icom America Inc. Page 13
Icom America, Inc.
12421 Willows Road NE
Kirkland, WA 98034
In the following steps, Each Individual Radio ID will be enabled to accept (Use) that ID List.
14. Choose Unit ID in the Unit field.
15. Click to enable the Use ID List setting and click the Apply tab at the bottom of the page.
All other Radios Unit ID’s need to be set similarly.
16. Verify that all the radio’s Use ID List setting appears as Enable in Transceiver Setting List
at the bottom of the page.
Talk Back Timer Setting
Important: The radio stays in Talk back mode for 5 seconds as a default. This timer can be
changed in Common Settings under Talkback Timer.
To Next Page
Loading...
