©2014 Icom America Inc. Page 8
Icom America, Inc.
12421 Willows Road NE
Kirkland, WA 98034
4. Select WPA-PSK/WPA2-PSK in the Authentication field.
5. Enter the Wireless LAN password in the PSK field. In this example, we are using
“1234567890” as shown above in Customer’s IP parameters settings.
6. Verify that the DHCP Client setting is set to Enable. This will allow the Customer’s
controller to assign IP address to the IP100H radio automatically.
7. Click Provisioning Server Settings and enter your IP1000C IP address in IP address field
(as assigned by the Company’s IT manager).
8. Programming Radio no. 1: Enter “1” in TRX No. Box for Transceiver No. 1.
9. Enter Password (iptrx) same as setup in the IP1000C for Unit ID.
To Next Page
Loading...
