ICON STAGE USER MANUAL
5.3 RIGGING DRAWINGS
1) The device can be rigged in any of the orientations shown in the image above.
2) The device must be kept at least 0.1 m away from any flammable materials (decoration etc.).
3) Always use and install the supplied safety cable as a safety measure to prevent accidental
damage and/or injury in the event the clamp fails.
Important:
Overhead rigging requires extensive experience, including (but not limited to) calculating
working load limits, specifying installation/ rigging materials, and periodic safety inspection of all
installation material as well as the device. If you lack these qualifications, do not attempt the
rigging of this device yourself. Improper installation/ rigging can result in serious bodily injury.
To Next Page
Loading...
