ICON STAGE - 9.3 Reset Functionality

ICON STAGE USER MANUAL
17
9.2.8 Fan Mode
1) Tap<MODE/ESC>button，access the main menu，Tap the <Up/Down>button until “Config” is
displayed. Press <ENTER>，the display will show “Config”.
2) Tap the <Up/Down>button until “Fan Mode” is displayed.
3) Press <ENTER>，the display will show“Fan Mode”.
4) The display show “Auto”，Press <Up/Down>，the display will show “Auto”，“High”，“Silent”.
5) Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.2.9 Gobo Scroll
1) Tap<MODE/ESC>button，access the main menu，Tap the <Up/Down>button until “Config”is
displayed. Press <ENTER>，the display will show “Config”.
2) Tap the <Up/Down>button until “Gobo Scroll” is displayed.
3) Press <ENTER>，the display will show “Gobo Scroll”.
4) The display show “OFF”，Press <Up/Down>，the display will show “ON”.
5) Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.2.10 Reset Factory Defaults
1) Tap<MODE/ESC>button，access the main menu，Tap the <Up/Down>button until “Config” is
displayed. Press <ENTER>，the display will show “Config”.
2) Press <Up/Down>，the display will show “Reset Factory Defaults”.
3) Press< ENTER>，the display will show “Reset Factory Defaults”.
4) The display show “OFF”，Press <Up/Down>，the display will show “ON”.
5) Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.3 Reset Function
With this function you can reset the device via the Control Board. You can select the different reset
functions by turning the encoder.
1) Tap<MODE/ESC>button，access the main menu.
2) Tap the <Up/Down>button until “Reset Function” is displayed.
3) Press <ENTER>，the display will show“Reset Function”.
4) The display show“Reset All”，Press <Up/Down>，the display will show“Reset Pan&Tilt”，
“Reset Others”.
5) Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.4 Communication
9.4.1 Read Dmx Value
With this function you can display the DMX 512 value of each channel. The display automatically
shows the channel with a value changing.
1) Tap<MODE/ESC>button ， access the main menu ， Tap the <Up/Down>button until
“Communication” is displayed. Press <ENTER>，the display will show “Communication”.
2) Tap the <Up/Down>button until “Read Dmx Value” is displayed.
3) Press <ENTER>，the display will show “Read Dmx Value” .
4) The display will show “ALL，Control，Pan，Tilt，……”.
5) Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.4.2 DMX Info
1) Tap<MODE/ESC>button ， access the main menu ， Tap the <Up/Down>button until
“Communication” is displayed. Press <ENTER>，the display will show “Communication”.