ICON STAGE - 9.1 Address and Signal Configuration; 9.2 Motion and Effect Settings

ICON STAGE USER MANUAL
13
Address A001~AXXX
Config
Mode
Extended Mode Default
Standard Mode
Select Signal
DMX Only Default
Art-Net On IP2
Art-Net On IP10
sACN
Set Universe 0000~32767 Default 001
Pan and Tilt
Tilt Reverse On/Off Default Off
Pan Reverse On/Off Default Off
Feedback On/Off Default On
Dimmer Mode
Standard Default (Use this
function ,
Please set the
Dim Modes
channel value to
100%.)
Stage
TV
Architectural
Theatre
Refresh 900~25000Hz Default 1200Hz
Gamma 2.0~2.8 Default 2.0
Fan Mode
Auto
Default
High
Silent
Gobo Scroll On/Off Default Off
Reset Factory Defaults On/Off Default Off
Reset
Function
All
Pan/Tilt
Others
Communi
cation
Read DMX Value ALL, Control, Pan, Tilt, ……
DMX Info DMX Update Rate
XXXX p/s
(Package per
second)
Comm Loss
No Fade on Loss
Fade out 30 seconds Default
Fade out 60 seconds
Info
Software Version X.X.X……
ARTNET IP
ARTNET IP
XXX. XXX. XXX. XXX
XXX. XXX. XXX. XXX
Cross Load SW
On
Need Password
50
Off Default
Total Run Time
XXXX (Hours)