59
Allow the rmware upgrade process to complete.
Press ‘ok’ once the rmware update has been completed.
Hardware Connections
How to add foot pedals (in Cubase)
(iCON V1-M V1.01)
(iCON V1-M V1.01)
Currently, only a few DAWs support the use of a footswitch in DAW controllers such
as the V1-M. Please check your DAW's user manual to see if your DAW has this
functionality. If so, you can then choose commands specic to the DAW to program
your footswitch. For example, to toggle the 'record' function on and o (as in the
example, above
To Next Page
Loading...
