iconBIT XD290HDMI User Manual
12
3.1.4 Miscellaneous
Use this menu to adjust miscellaneous settings.
Version Info
- This tab shows you information about the software installed and about the material
components of your player.
USB Upgrade
- Select to update the firmware via a USB stick.
Method 1
Enter Setup
Misc
USB Upgrade
Select to update the firmware via a USB stick.
1) Copy ‘install.img’ to the root directory of a USB stick, and connect it to the USB
HOST port of the player.
2) Press OK to confirm.
Method 2
Step 1. Copy ‘install.img’ to the root directory of a USB stick, and connect it to the USB
HOST port of the player.
Step 2. Press and hold the power / standby button on the front panel, and do not loosen.
Step 3. Plug the power cable into the DC IN jack, wait for about 5 seconds or more, and
then loosen your finger on the power / standby button. Firmware installation will start.
To Next Page
Loading...
