Chapter 1 Introduction
ET-7000 AIO User Manual, Apr. 2009, V1.04, EMH-011-104----------12
1.2. General Specifications
System
CPU 80186-80 or compatible
EEPROM 16 KB
SRAM 512 KB
FLASH ROM 512 KB
Built-in Watchdog Timer Yes
Communication Interface
Ethernet Port 10/100Base-TX Ethernet Controller, RJ-45 Port
LED indicators
System Run Indicator Yes
Ethernet (Link/Active) Yes
Ethernet (10/100M) Yes
Isolation
I/O Isolation
Dependent on the type of ET-7000 module. (Please refer to “Sec 1.3 Module
Selection” for more detailed information)
Ethernet Isolation 1500 V
DC
Power
Power requirements +10 ~ +30 V
DC
(non-regulated)
Power consumption
Dependent on the type of ET-7000 module. (Please refer to “Sec 1.3 Module
Selection” for more detailed information)
General environment
Operating temperature -25 ~ +75 °C
Storage temperature -30 ~ +80 °C
Relative humidity 5 ~ 90% RH, non-condensing
Mechanical
Dimensions (W × H × D) 72 mm x 123 mm x 35 mm
Installation DIN rail, wall or piggyback mounting
I/O Components
Dependent on the type of ET-7000 module, please refer to the next chapter for
more detailed I/O specifications.
To Next Page
Loading...
