Chapter 3 Web Configuration Page
ET-7000 AIO User Manual, Apr. 2009, V1.04, EMH-011-104
----------68
Load All Setup Default
Table 3-2 Load All Setup Default Table
Function Name Details Factory default
All of the Ethernet settings Refer to Table 3-1 Configuration
All of the Module I/O settings Refer to Sec. 3.2.3
Account management The default account is
“Admin” and the
password is “Admin”
Authentication
IP filter settings Allow all of the IP
connections
Web HMI Web Page editing function 0 pages
Pair Connection I/O Pair connection Disabled
All Set the factory default value for the 4 main
functions above. (Configuration,
Authentication, Web HMI, Pair Connection)
Refer to the function
details above.
Press the button to allow the settings to take effect.
Note:
Be aware that after modifying the settings and submitting the new information, all previous
settings for the module will be lost.
To Next Page
Loading...
