Chapter 3 Web Configuration Page
,
ET-7000 AIO User Manual, Apr. 2009, V1.04, EMH-011-104----------78
A maximum of 10 items in each group can be configured.
: The image file name selected by clicking the “Browse” button.
The image file type can be either of .jpg, .gif or .bmp. The recommended resolution for the
image to be displayed on the Editing Web page is 340 * 250 pixels.
Each ET-7000 series module has a maximum storage space of 64KB.
: Browse a directory on the local disk to select an image file to be uploaded to
the ET-7000 module.
: Upload the selected image file to the ET-7000 module.
: Delete all files that are currently stored on the ET-7000 module.
Click the button to delete all files that currently exist on the ET-7000 module.
Page Name: This field can be used to give the page a more descriptive name. The maximum
number of characters that can be used for a page name is 10.
Image: Use the list box to choose the image to be displayed in the preview window.
Save: The information displayed on this page will be saved after clicking this button.
Set as the Start Page: Clicking the checkbox to make the current page to be displayed when
clicking the Web HMI link in the Web HMI section of the Main Menu
tree.
: Clicking this button will link to the “Edit Group Register” page to allow the point
information to be edited.
: Click the “Clear” button to delete the point information.
Refer to next Section for more details regarding the definition of the field if the “Group” Table.
Notes:
z The “Del All” action will delete all files currently stored on the ET-7000 module, and it
cannot be used to delete individual files.
z The ET-7000 will reboot after deleting the files.
To Next Page
Loading...
