Tiny Modbus/TCP to RTU/ASCII Gateway
Copyright © 2020 ICP DAS CO., Ltd. All Rights Reserved. - 37 -
3.4 Configuring the Serial Port
1. Open a web browser, such as Google Chrome, Internet Explorer, or Firefox, and enter the URL
for the tGW-700/GW-2200 module in the address bar of the browser, or click the “Web” button
in the eSearch Utility. You can right click the IP address field and click the “Copy to Clipboard” to
copy the IP address.
2. When the login screen is displayed, enter the password (use the default password: admin) in the
login password field, and then click the “Submit” button to enter the configuration web page.
3. Click the “Port1” tab to display the Port1 Settings page.
To Next Page
Loading...
