Tiny Modbus/TCP to RTU/ASCII Gateway
Copyright © 2020 ICP DAS CO., Ltd. All Rights Reserved. - 69 -
5.5 Filter Page
The Accessible IP (filter is disabled when all zero) Settings page is used to query or edit the IP Filter
List. The IP Filter List restricts the access of packets based on the IP header. If one or more IP
address are saved to the IP Filter table, only clients whose IP is specified in the IP Filter List can
access the tGW-700/GW-2200.
The following is an overview of the parameters contained in the Accessible IP section:
Add an IPv4 address to the IP Filter List.
Add an IPv6 address to the IP Filter List.
Delete a specific IP# (Number = 0 to 4) address from the IP Filter List.
Delete all items from the IP Filter List.
Save Configuration (finish)
Save a new IP Filter List to the Flash memory.
Click this button to save the revised settings to the tGW-700/GW-2200.
To Next Page
Loading...
