To Next Page

To Previous Page

2-4. Initialization Checklist

While vending machine in an energized state,

please DO NOT plug/unplug any wires on

CC6100.

Please ensure that there are no interferences

between the connected wires, the coin insert

and return device, and the door of the automatic

vending machine. After the inspections are

complete, then turn on the vending machine

power.

Check the amount of coins in each coin tube is

above the minimum requirement level. Please

refer to sticker on the tube cassette for minimum

level information. (The coin changer would not

work correctly without enough coins in the coin

tubes.)

After refill of tube cassette, the coin changer will

detect the adequate coin quantity within a few

seconds.

Dispense at least 1 coin from each coin tube to

ensure that the dispensed coins fall into the coin

return box of the vending machine.

-6-

CC6100

Questions and Answers:

Need help?

Do you have a question about the ICT CC6100 Series and is the answer not in the manual?

ICT CC6100 Series Specifications

General