IDEAL Networks LanTEK IV - LanTEK IV Software and Cabling Standards

57
Proof of Performance
56
www.idealnetworks.net
Project management software, for import & export
• IDEAL AnyWARE Cloud: cloud version which requires an HTML 5
compatible browser on Windows, Mac, Linux, and mobile devices
(Android/iOS)
• IDEAL AnyWARE Desktop: computer version requires - Microsoft
Windows 10, 2 GB RAM, 500 MB of disk storage + 1GB of storage for
approximately for 1500 category 6/Class E tests
• All measurement points are saved in the devices and then transferred
to the software. Full analysis of plot data available in cloud and desktop
versions of IDEAL AnyWARE
• Re-certification to dierent test standards available for limits up to 500
MHz (LanTEK IV 500) or 3000 MHz (LanTEK IV 3000)
Supported cabling/test limits
• ANSI/TIA: Cat. 3, 5e, 6, 6A and 8.1/8.2 (100Ω)
• ISO/IEC: Class C, D, E, EA, F, FA, I/II (100Ω)
• Fiber optic via optional FiberTEK IV modules: multimode from OM1 to
OM5 and single mode OS1-OS2
Supported test connectors
• RJ45 Permanent Link: TIA Cat. 6A / ISO Class EA up to 500 MHz (LanTEK
IV 500)
• RJ45 Permanent Link: TIA Cat. 8.1 / ISO Class I up to 2000 MHz (LanTEK
IV 3000)
• Field replaceable heads on RJ45 permanent link adapters, recommended
replacement interval every 2000 insertions
• RJ45 Channel: TIA Cat. 6A / ISO Class EA up to 500 MHz (LanTEK IV
500)
• RJ45 Channel: TIA Cat. 8.1 / ISO Class I up to 2000 MHz (LanTEK IV
3000)
• TIA Cat 8.2/ISO Class FA/ Class II: TERA, GG45, EC7 universal adapters
for permanent link and channel measurements
• Optional FiberTEK fiber adapters: interchangeable SC, ST and SC
included, LC optional
Measurement time
• Certification for Class EA / Cat 6A up to 500 MHz with plots, DC
resistance unbalance, TCL/ELTCTL, time domain NEXT/Return Loss: 7
seconds
• Certification for Class I/II, Cat 8 up to 3000 MHz with plots, DC resistance
unbalance, TCL/ELTCTL, time domain NEXT/Return Loss: 25 seconds