IDEAL Networks NaviTEK NT Pro - Page 20

NaviTEK NT 151844 Iss 4
User Guide Page 20
Type
Manufac
turer
Part No
Speed
Fiber
type
Waveleng
th
Connector
Type
SX Avago AFBR-5705PZ 1Gb/s Multimode 850nm LC Duplex
SX Apac LM28-C3S-TI-N-DD 1Gb/s Multimode 850nm LC Duplex
LX Avago AFCT-5705PZ 1Gb/s Singlemode 1310nm LC Duplex
LX Apac LS38-C3S-TC-N-DD 1Gb/s Singlemode 1310nm LC Duplex
ZX Apac LS48-C3U-TC-N-DD 1Gb/s Singlemode 1550nm LC Duplex
Select 802.1x to set the tester to use 802.1x security protocol if required
Select IP to set up the IP behaviour of the tester including IP type, address, Netmask,
Gateway and DNS if required.
Select REPORTS to set the parameters to be used for the reports:
• Format
o PDF & CSV - the reports contain both PDF and CSV files
o PDF - the reports contain only a PDF file
o CSV - the reports contain only a CSV file
• Size
o Summary - the reports contain only a summary table listing the
overall result of each test
o Brief - the reports contain a summary table and a single page result
for each test
o Full - the reports contain a summary table and full details of each
test
• Results
o All- every test made is included in the reports
o Pass - only tests that have passed are included in the reports
o Fail - only tests that have failed are included in the reports
• SSID - The identity of the Wi-Fi hot spot set up by the tester for report
transfer to smartphones (factory set)
• Wi-Fi Password - If required, edit the default password (ideal001606) used
by the IDEAL Anyware
TM
app to access the tester.
Select CDP,LLDP,EDP to enable the various types of Discovery Prococol supported
by the tester